Homemade Pizza Dough

I did it!  I made pizza dough from scratch!  First time ever!!!  And I have to say, it tastes WAY better than the pre-made dough you can get in a can.  Are those called cans?  I keep going back and forth.  I know biscuits come in a “can”, but to me, it’s not a can unless you have to use a can opener.  Pressure sealed cardboard doesn’t really scream “can” to me.

I’ve started to ramble.

Anyway, I found this pizza dough recipe in the Pioneer Woman’s cookbook, and wanted to make it, but kept putting it off.  I mean, it involves yeast!  The only bread I’ve ever made is banana bread or dessert items.  Never have I made something that need to *gasp* rise!  But it actually wasn’t as scary as I thought!  Yes, I messed up a little when I didn’t mix it long enough to form a ball, but I remixed it after I noticed that it wasn’t rising after an hour of sitting, and it turned out just great.  Hey, you don’t learn if you don’t make a few mistakes along the way.

Here’s what you’ll need:

  • 1 scant tsp active dry or instant yeast
  • 3/4 cup warm water
  • 2 cups all-purpose flour
  • 1 tsp kosher salt
  • 3 tbsp extra virgin olive oil

Fill a measuring cup with 3/4 cup of warm (not lukewarm) water.  You’ll need it quite warm to activate the yeast.

They have these cute little packets of active dry yeast at the grocery store, but I think you can also get it in a jar.  Don’t mind my chipping nail polish.

The packet had more yeast than I needed, so I measured out a scant teaspoon (scant means not quite a full teaspoon).

Pour the yeast into the warm water.

Let the yeast and water sit for about 10 minutes.

Meanwhile, we can start making the dough.  Measure out your flour.

And dump into the bowl of your stand mixer.

Add salt.

And olive oil, and mix until combined.

While you wait for your yeast to finish “activating”, check on your son to make sure he isn’t putting anything weird into his mouth.  As you can see, he had some fun playing with the kitchen rug, as well as the cat’s food bowl while mommy was cooking.  Luckily, the only thing that went into his mouth were his fingers.

With your mixer on low, slowly add the water and yeast mixture.

Mix with the paddle attachment until the dough forms a ball.  You’ll know when this happens.  I didn’t mix it long enough when I took this picture, so don’t do what I did.  Make sure you mix it long enough or it won’t rise properly.

Again, this picture is a little misleading, so just imagine that it’s a nice little dough ball in there.  Coat the bottom and sides of a medium bowl with olive oil (or you could also use cooking spray), place the dough in the bowl, and cover with plastic wrap.  Let the dough rise for at least an hour, but overnight is best.  If you’re not going to use the dough within an hour or two, stick it in the fridge to continue rising.

Here’s my lovely risen dough the next day.  I was so happy when I saw that it was actually doing what it was supposed to do!

Spread some flour on your very clean counter.  You could also roll out your dough on a very large cutting board, but either way you’ll need to sprinkle some flour on the surface so your dough doesn’t stick.

Sprinkle some flour on your rolling pin and the dough and roll out until it’s about 3/4 inch thick.

To transfer your dough to the baking sheet, the easiest way is to roll it onto your rolling pin, and then unroll it onto the baking sheet.  This way you won’t tear it with your fingers while trying to lift it.

Clearly, I am not a pro at rolling dough into a perfect circle, but luckily this isn’t a pizza making contest, and I doubt the hubster will care what shape his pizza is.

Top dough with your favorite pizza toppings and bake at 500° for 10-12 minutes.  One thing I loved about this dough, as opposed to the canned dough, is that it cooks very evenly.  Pretty much every time I’ve made pizza with the canned dough, the crust is almost burnt by the time the middle is just barely done.  Not so with this homemade dough!  Perfectly cooked all the way through!

*Note: After making this recipe several times, I found that if I poke the rolled out dough with a fork a few times it will prevent air bubbles from forming during cooking.

Tada!!!  I went with the classic pepperoni pizza with homemade sauce.  Yum!

[yumprint-recipe id=’2′]

 

 

DIY Curtain Tutorial

I’m proud to say that I have made all the curtains in our house.  In total, there are 5 sets: blackout curtains in our master bedroom, Grayson’s bedroom, and our bonus room, and blackout Roman shades in our living room.  The newest set (which is what I’ll be covering in this tutorial) is regular, unlined curtains in our kitchen.  Since I couldn’t think of any reason why I would need blackout curtains in my kitchen, I omitted the lining, which made these the easiest curtains I’ve made so far!

Here’s what you’ll need:

  • home decor fabric (mine was 54″ wide)
  • ruler
  • scissors or rotary cutter
  • sewing machine
  • thread
  • pins
  • iron and ironing board

First, you’ll need to measure your window to determine how much fabric you’ll need.  My window is 68″ wide x 84″ tall.  The width doesn’t really matter too much unless your window is REALLY large or REALLY small, in which case you’ll want to adjust your fabric accordingly.  As far as the height goes, this will determine how many yards of fabric you’ll need.  Since I knew I wanted my curtains to hang about 6 inches above the top of the window, I added 6″ to the initial 84″ measurement, which brought my total to 90″.  So determine where you want your curtains to hang and measure from there.  Then you’ll need to add 10 inches to that measurement (2 inches for the top hem and 8 inches for the bottom hem).

So, here was my measurement:

90″ + 10″ = 100″

That was the total for one side.  Remember you’ll need to make two curtains.  So my total fabric length needed to be 200 inches.  Since I like to play it safe and have some extra fabric just in case, I bought 6 yards of fabric (or 216 inches).

Measure and cut your fabric.  You may need to fold your fabric in half lengthwise once or twice to be able to cut in a straight line if you’re using a cutting mat (which I highly recommend).

Once your fabric is cut, turn it so the wrong side is facing up.  Fold and press the side of your fabric (going lengthwise) one inch, or if your fabric has designer and color information on the side like mine did (see picture above) you can fold it until you start to see the pattern on the right side of the fabric.

Fold and press one more time so that you have a one inch hem going down the length of your fabric.

Pin in place and repeat on the other side.

Sew both hems as close to the edge as possible.  Don’t forget to back stitch at the top and bottom of your fabric to secure the thread.

Here you can see my stitch placement on the hem.

Time for the bottom hem.  Make sure your fabric is still facing with the wrong side up and turn up your fabric 4 inches (across the width) and press.

Fold up 4 inches again and press.  This will create a nice thick hem at the bottom.

Pin in place and sew as close to the top edge as possible (just like you did with the sides).

Here’s another example of my stitch placement on the bottom hem.

We’re almost done!  Time for the top and final hem!  Turn and press your fabric one inch.

Turn up one inch again and press.

Pin in place and sew.  You’re all done with the sewing!!! Now we just need to attach our curtain rings and hang it up!

These curtain rings with the clips are such a time saver, because you don’t have to worry about making holes for the rings!

Tada!!!!  Beautiful new curtains, and you made them yourself!!

These curtains add that special touch I was looking for in my kitchen.  I can’t believe it took me almost three years to decide this window needed some pzazz!

Here’s a picture of them closed.  They’re so colorful and cheery!

I hope you enjoyed this tutorial!  If you have any questions, please feel free to ask in the comments section.

Throw Pillow Tutorial

After almost a year of staring at the not-so-attractive throw pillows that came with our couches, I finally decided to make new covers for them that were more my style.  Luckily the original covers came with zippers so they were easy to remove.

Here is what our couch looked like with the original pillows.  They’re definitely not the worst pillows I’ve ever seen, but I thought some gray chevron fabric would give the nice modern and chic touch I was looking for.

Here’s what you’ll need to create your new throw pillows:

  • 2 yards of fabric
  • sewing machine
  • rotary cutter or scissors
  • cutting mat
  • straight edge fabric ruler to run your rotary cutter along
  • pins
  • 18″ Pillow Insert

Start by cutting a 19″x19″ square from your fabric.  We are going to be sewing with a 1/2 inch seam allowance, so you’ll need your fabric one inch bigger than the size of your pillow.  My pillows are 18″, but if you are using a smaller or bigger pillow, just adjust the measurements accordingly.   If your cutting mat isn’t big enough like mine, you may have to fold your fabric in half to get a straight cut.

Next, cut a 19″x24″ piece of fabric.  This will be for the back of the pillow.  You’ll need it longer than the front piece so that we can create an overlapping pocket opening for the pillow to slide into.

Turn that longer piece of fabric horizontal, measure 8 inches from the right (or about a third of the length of the fabric), and cut all the way through so that you now have two separate pieces for the back.  In total, you will have three pieces of fabric for your pillow.

Press a 1 inch seam on each of the back pieces where they used to meet.

I also pinned the seams I just pressed as an extra precaution, but this isn’t necessary if you are careful when sewing.

Next, sew your seams on the two back pieces of fabric about 1/8 inch from the rough edge.

Lay your front fabric piece right side up.  Then lay the smaller of the two back fabric pieces on top of the front piece, right sides together.  The seam you just sewed should be in the middle, not on the outer edge.  Now lay the larger of the two back pieces down, with right sides together.  The two back pieces should overlap, and the seams will create the pocket for the pillow.

Pin and sew around the entire pillowcase using a 1/2 inch seam.

Cut your corners at a 45° angle to reduce bulk.  Be careful not to cut where you have sewn.

Flip your pillowcase right side out and push out the corners with something pointy, like scissors or a knitting needle.

Now all that’s left to do is insert your pillow!

Ahhh!!!  I like this so much better than the original pillows!  My house is on it’s way to becoming modern and chic!  I might just have to make new throw pillows for all the bedrooms as well!

I hope you enjoyed this tutorial!  Let me know if you have any questions, and I will be happy to help.